Industries

Welspun — Application request cards

Interior cloth requests start from the room, the contact and the cutting plan. These cards are questions for a brief, not records of finished projects.

Application request cards

Comfort and daily contact
Discuss
Touch, care and the surface people actually meet on a seat, arm or cushion.
Include
The cloth reference and whether the piece is a cover, a scatter cushion or a headboard panel.

Daily contact is a wear story and a care story at the same time. A cloth that feels soft in the hand can still pill at a cushion edge. Natural fibres are often discussed for hand and moisture take-up. Synthetic fibres are often discussed for strength and drying. Neither line is an environmental ranking. Write the blend as percent by mass, for example 68% polyester and 32% viscose, and name the property the room needs. Describe seated hours, removable covers or occasional decorative use, then name the property to examine. Abrasion resistance under ISO 12947 and tear under ISO 13937-2 are separate tests. Pilling needs its own method. Ask which method and specimen state would make a comparison fair.

If covers will be wiped or professionally cleaned, say so. Dimensional change after that care is a different question from the dry width on a roll. Record the swatch date so a later lot can be set beside it.

Drapery, daylight and interior panels
Discuss
Drape, cuttable width, pattern repeat and how the shade should be judged in the room light.
Include
Construction, the finished drop you are planning, and the specimen state of any lightfastness note.

Window cloth is not seating cloth turned sideways. Fullness, heading and hem take width before the panel hangs. A 280 cm finished drop planned at double fullness can consume more than twice the face width before hems. Usable width has to be read after selvedge and, where a motif exists, after the repeat. A 142 cm usable width does not become 145 cm because the overall roll was wider. A nominal 180 g/m² does not tell you whether the cloth will fall in soft folds or stand away from the glass. Ask for the construction and look at a length long enough to show the drape, not only a postage-stamp swatch. If someone proposes a coated face or a laminated film, those are different constructions: coating add-on and flexibility on one side, film and peel on the other. This page does not assume either unless the brief names it.

Daylight raises colour questions that a warehouse lamp can hide. If a shade band or lab dip is part of the decision, name the light and the standard you are using. Lightfastness, if it is relevant, needs its own method and exposure condition. Liquid resistance and vapour movement are different behaviours and are not assumed for interior drapery unless the brief says why they matter. This card stays inside home textile cloth. It is not an outdoor performance programme.

Cutting, joining and lot alignment
Discuss
How the cloth will be cut, seamed and matched from one piece to the next.
Include
Usable width, pattern direction, quantity and the destination you want to discuss.

A cover maker needs to know whether usable width clears the pattern, whether the face has a direction, and whether a backing changes needle choice or seam slippage. Those points are discussion items. They are not a claim that a workshop relationship exists.

A shade approved on one day can drift on a later dyeing even when composition and GSM look unchanged. Keep the physical standard with the notes. A stock conversation asks which dated lot is actually on hand and whether the next piece continues that shade band. A custom conversation asks for a sample, a named test and a bulk approval before the construction changes. A 40 m enquiry is a discussion quantity, not proof of stock and not a minimum. Quantity and destination explain scale. They do not publish a lead time or a reserved roll. If a document is offered later, check the holder, the product scope and the date. Wording limits for that reading stay on the statement-boundary page.

Build the application brief in order

  1. Setting

    Say whether the textile is discussed for indoor contact, outdoor exposure or a processing step. One setting per paragraph keeps the later question readable.

  2. Stress

    Name the behaviour under review, such as handle, moisture, dimensional change or joining. Different behaviours need different methods.

  3. Inquiry

    Include composition, construction, quantity and destination only as the context of the request. They do not confirm that a material has been approved for that use.

Describe the use environment

Contact, daylight and cutting notes make the home textile brief specific.

Discuss your fabric requirements